|
An error data point is sent to the Event Manager for unknown message formats and if messages are received from addresses not recognized in WinCC OA (no peripheral addresses was configured). The error is output on stderr if an arbitrary debug flag (e.g. -dbg 3) is given. |
The address in SSI messages is made up of the following elements: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A - Manual disable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure: Data-type and Data-format assignment . |
|
The address of a data point with an integer data format (data format 2) is shown in the example. The project-related data type 11 is assigned to the integer format. The data point is assigned to the peripheral device with module number 20, value number 30 of component 21 in region 0. The correct address string then reads:
11.0.21.20.30.0 |
|
V 3.11 SP1
Copyright ETM professional control GmbH 2013 All Rights Reserved