Command line optionsCommand line options are parameters that are given to the manager when the managers start from the console or parameters that are given to the manager when a shell command is executed. Example Start the user interface in the extended mode as follows:
WCCOAui -m para -extend
The user interface starts with the configuration module (see PARA module) if the necessary rights for PARA exist.
For more information see General options. Debug levels (debug flags)There are debug levels for each manager or driver (for example, -dbg 2 or -dbg <name>). The levels enable specific information output. The command line option -helpdbg shows the possible debug levels in the command line interpreter of the operating system. The dbg name may be an arbitrary name and can be added directly to the console or registered first via the registerDbgFlag() function. The debug flags, however, do not have to be registered first but can be added directly to the console. To use multiple debug flags for one manager, it is possible to add them separated with a comma ",", e.g. "-dbg 10,11,12". For more information see chapter General debug flags. |
Chapter |
Description |
Description of command line options and debug levels as well as links to managers |
|
Options that are valid for all managers and drivers |
|
Debug flags which can be used for every manager and driver. |
|
Possible error codes of the ASCII Manager (see also ASCII Manager) |
|
Specific options and debug levels of the CTRL Manager (see also Introduction CTRL) |
|
Specific options and debug levels of the Data manager |
|
Specific options and debug levels of the Event Manager |
|
Specific options and debug levels of the redundancy managers (see also Redundancy) |
|
Specific options and debug levels of the Simulator driver (see also Simulator) |
|
Specific options and debug levels of the User interface Manager. See also Module VISION, basics and Module GEDI, basics |
V 3.11 SP1
Copyright ETM professional control GmbH 2013 All Rights Reserved