Using the panels for correction and laboratory values you can: |
Retrieve values from the HistoryDB. |
Change existing values (=correct). |
Add new values to the HistoryDB. |
This can become necessary, for instance, if a sensor is found to be faulty and produces incorrect readings. In this case, you can post-correct the measurements log (for example, by using data from another measurement or estimated values). |
Note The original values are not lost. You can only change the correction values, not the periphery and default values. |
In the Laboratory Values panel you can, as in the Correction Value panel, enter, edit and read out data that has been saved in the historical database. The difference is that the Laboratory Values panel has been designed specifically for manual input, that is, for measurements that do not enter the WinCC OA system through a peripheral interface, but are entered by hand such as readings that have been taken in a laboratory. |
The Laboratory Values panel only displays those data point types and data points that have a function "Man" (for "manual input") in the first compression level C1. This is the case if the "MAN" function has been enabled instead of statistical functions in the compression settings for the corresponding data point type or data point (see Archiving and Compression). |
Chapter |
Content |
Considerations when making changes to values. |
|
How to access the panels and their relevance. |
|
Specifying data points and the database readout period. |
|
Entering, editing and reading out historical data supplied by peripheral devices. |
|
Specifying data points and the database readout period. |
|
Entering, editing and reading out historical data that has been entered by hand. |
|
Examples with links |
|
Example for working with correction values |
|
Example for working with laboratory values |
|
Summary and links to other relevant chapters |
Note
If necessary please look again at the following chapters: Archiving, HistoryDB and Archiving/Compression. |
V 3.11 SP1
Copyright ETM professional control GmbH 2013 All Rights Reserved